Custom Light Steel Villa

Product Overview

A Custom Light Steel Villa is designed around a specific project rather than a fixed catalogue floor plan. The structure uses cold-formed light-gauge steel and can be developed for one-off private homes, sloped sites, traditional or regional architectural styles, show houses and other projects where climate, room planning, facade design or site conditions require a purpose-built solution.

Core Advantages

Steel-Part Accuracy Within ±1 mm

Steel parts are fabricated to a dimensional accuracy within ±1 mm. That tolerance is particularly relevant on projects with non-standard openings, unusual roof angles or one-off wall panels, because aligned connection points reduce corrective work during site assembly.

Project-Specific Residential Load Criteria

Roof live load is specified at 0.5-0.7 kN/m² and floor live load at 2.0-2.5 kN/m², depending on the design. Before fabrication, the engineer can set the declared load criteria to suit the room uses, terraces and roof forms included in the project.

Air Tightness at ≤1.0 m³/(m²·h)

Air tightness is specified at ≤1.0 m³/(m²·h), and the insulation can be adapted for cold, temperate or tropical climates. If the project includes heating, cooling or humidity control, the wall layers can be designed together as a complete envelope rather than chosen as unrelated materials.

Customization

Architecture & Structure

The approved brief can cover building size, number of floors, room planning, roof geometry, facade openings and other structural details specific to the project.

Wall System

Structural board, insulation, moisture barrier, interior finish and exterior finish can be specified together as a complete wall build-up for the destination climate and architectural design.

Engineering Deliverables

Depending on the agreed scope, engineering deliverables can include concept design, structural calculations and construction drawings before the manufacturing package is released.

Quality Control

The factory holds ISO 9001 Quality Management System and ISO 14000 Environmental Management System certifications. Custom work is controlled against the approved project documents through cutting, bending, welding and coating. Production equipment and staged checks are used to keep one-off components consistent with the released project requirements. Finished products receive 100% inspection before shipment. Third-party inspection is accepted when the project requires independent verification.